Parts & Accessories

The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.

Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.

Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.

Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves

The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.

Don't guess at your tire pressure, know with Sunlite's Duo Sport Gauge. This precision gauge reads your pressure accurately to 160 psi. The dual head works and plays well with both Presta and Schrader valves, too.

A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.

- Ball-inflating needle for footballs, basketballs and more

- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm"

- Genuine Sunlite replacement hose - Type: Fits Sunlite Frame Pump : 5.25mm

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

Will fit Specialized Sport/Comp/HP floor pumps from 2010 - present.

This chuck comes from the same vendor who supplied them to SILCA pumps for more than 25 years. It makes a great replacement or addition if you are buying a new Stainless Presta chuck or CP1 Disc Adapter for your older pump. This part is made from nickel-plated brass and uses an o-ring to seal the connection. - Hose barb fits into all SILCA hoses both old and new - Threads onto Schrader valves and all SILCA chucks with male Schrader threads (17-4 Presta chuck, HIRO, and CP1 Disc Adapter) - All metal construction, nickel-plated brass

Years ago while Josh was working with the Team CSC at the Dauphine Libere, he noticed one of their mechanics using the most amazing little chuck to manage the disc wheel inflation. Unlike anything he had seen before, it was all metal and used a 'lollipop' lever on the side to lock onto the valve stems in disc wheels. The mechanic explained that these were made in Japan and were coveted by all the Euro-Pro mechanics due to their scarcity. So Josh set out to improve the design and make it available to cyclists everywhere. - Full metal construction, guaranteed for 25 years and covered by SILCAShield - Can effectively seal on valve stems as short as 10mm! - Uses SILCA 254 High-Tech Elastomer gasket - Adjustable gasket pre-load allows for a custom fit on any valve as well as compensation for gasket wear - Male Schrader thread fits into any Schrader chuck, or use SILCA Thread-On Schrader Adapter to fit a bare hose - Bullet-proof high-pressure, disc-compatible chuck for high-pressure situations.

Topeak's incredibly compact CNC aluminum Threadlock Upgrade Kit threads directly to Presta or Schrader Valves with no need to change internal parts or use extra adapters. It fits most rubber pump hoses, and is compatible with Topeak JoeBlow Ace, JoeBlow Mountian, JoeBlow Sport II, JoeBlow Max II and JoeBlow Max HP.

Replacement Composite Matrix pump mount for all High-Pressure hand pumps (HP, Tech HP, Micro Floor HP/HPG, Pressure, Carbon Pressure Drives). Includes Velcro pump strap.

Bag of 3 replacement washers for EVA heads on all SKS floor pumps

Compatible with Planet Bike ALX, AL, STX, ST, and COMP floor pumps - Dual head with hose - Will work with any floor pump Planet Bike has made except for Air Supreme

90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.

Made of heavy-duty hook-and-loop material, the Pump and U-Lock Tie also has a neoprene pad stitched next to the rectangular plastic common loop. Put the neoprene pad between your pump and frame, double-back the hook strip onto the loop, and you can rest assured that no matter how hard you ride, your pump will stay put. In addition to attaching pumps, the Pump Tie is also excellent for securing U-locks, fishing poles, and other delicate items that require a secure bond and a load-damping pad. - Dimensions: 1.5 x 10 inches - Weight: .5 ounces/14 grams

Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.

Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.

Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.

Replacement for Air Tool Pro Pump handle.

Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.

Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads

• Secures frame pump to frame • Nylon • Also good for use as a watch band

Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.

Replacement Composite Matrix pump mount for all High-Volume hand pumps (HV, Tech HV, Micro Floor HV/HVG, Alloy, Carbon Drives). Includes Velcro pump strap.