The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. The fork’s new crown provides ample clearance for 26 x 2.1 tires and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube. - Axle-to-crown: 26" = 376mm - Offset: 45mm - Steerer: 26" (42–54cm frames) = 300mm; 26" (56–62cm frames) = 400mm - Tire Clearance: 26 x 2.1" - Weight: 26" = 2.1 lb (0.97kg) uncut
Surly's Moonlander Fork has clearance for a 26 x 4.7-inch wide tire. It accepts specialty front hubs with a rear disc offset or 135mm rear hubs. It takes a front disc-brake adapter so you can run any brakes that come in a traditional front/rear set without having to break up a set. This fork features large-diameter, thin-wall chromoly blades that taper for a smooth and supple ride. And, it's got standard and low-rider rack mounts and comes in a tough powdercoat finish because it's awesome.
$51.99 - $59.99
• Caliper brake mounts • 45mm rake • Chromoly construction • Threadless fork • 300mm steerer length
Upgrade your road rig with Origin-8's Cromo-Lite II Road fork. It features full cromoly construction for a sublimely smooth ride.
$223.00 - $255.00
• Upgrade from crown adjust to remote adjust • Includes two bleed syringes, torx wrench, Motion Control XDNA compression damper, XLoc remote lever and hose • Available for Revelation and SID
$21.99 - $23.99
• Caliper brake mounts • 35mm rake • High-tensile steel construction • 1-inch steerer diameter • 185mm steerer length • Threaded fork • Compatible with 20-inch wheels
• Chromoly construction • V-brake mounts • Fits bikes with 16-inch wheels • Steerer length: 250mm
- Forged dropouts with eyelets, straight-gauge oval tapered blades - Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing - 85mm threaded section - Fits up to 30c tires - Axle to Crown Length: 382 mm - Brake Mount (Fork): Long Reach Caliper (55mm - 73mm) - Crown Race: 27 - Front Axle: 9mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill - Steerer Type: Straight - Weight: 839g, 876g, 907g - Wheel Size: 27"
Economically priced hi-tensile steel MTB fork for 26-inch wheels. - Steerer Type: Threaded Steerer - Size: 1" (7/8 ID) - Steerer Length: 198mm - Rake: 45mm - Axle-to-Crown: 393mm - Race Diameter: 27mm - Axle: 3/8" - Thread Length: 95mm
$199.99 - $209.99
- Monark style linkage fork for vintage cruisers - Full chromoly construction - Disc or Drum brake mounts (160mm Max rotor) - Size: 26" - Rake: 57mm - Axle-to-Crown: 417mm - Axle: 3/8" - O.L.D.: 100mm
Our Nemesis fork is built to last and take a serious beating. This fully heat-treated chromo fork features slimmer 5mm-thick CNC machined dropouts and a shorter 25mm offset, giving you a more responsive front end, so if you're going front peg first down a handrail, or blasting a quarter pipe then this is one solid fork you can trust.
• Cantilever brake mounts • Chromoly construction • Threadless fork • For 26-inch wheels • 250mm steerer length • 1 1/8-inch steerer diameter
• Caliper brake mounts • 385mm axle-to-crown • Chromoly construction • 1-inch steerer diameter • Threaded fork
The Cutthroat carbon fork is full of features, ready for any adventure. - Full Carbon fork, tapered steerer - Fits 29 x 3.0" tires - Three-Pack mounts - Crown light mount - Axle to Crown Length: 483 mm - Brake Mount (Fork): Post Mount 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Wheel Mount Center Offset (mm): 0 - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Steerer Tube Length (mm): 260 mm - Wheel Size: 27.5+ , 29" , 29+ - Rotor Size (Fork): 200 - Maximum Tire Clearance (Fork): 3
Replacement disc compatible forks for the Surly Straggler. - Tire Clearance: 50mm (w/o fender) - Weight: 2.4 lb (1.1kg) uncut - Axle-to-crown: 380mm - Offset: 44mm - Steerer: 360mm, 1-1/8" straight
The RockShox Lyrik gets a Charger 2 damper, which reduces overall weight, increases bump-sensitivity and traction, and reduces the force needed to turn knobs and lock in the best setting for the terrain. And since today’s enduro riders demand ultimate pedaling efficiency, the new Lyrik is remote compatible, which allows for on-the-fly compression control. And, the DebonAir air spring increases small bump sensitivity and mid-stroke support, making the Lyrik better at tracking terrain with greater stability in rock gardens and rougher trail. - Charger 2 damper is lighter, more bump-compliant, and has more easily adjustable knobs - Updated air pressure guides maximize performance for E-MTB applications - Fast Black coating on the upper tubes provides improved durability and decreased friction - OneLoc Remote actuated open/lockuot adjustment - Crown Race: 40mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Wheel Size: 27.5" , 27.5+ - Maximum Tire Width: 81mm
The RockShox Pike is like a stealth bomber designed specifically for new-school trail riders. Its new damper rides high in the travel where it’s the plushest. Its industry redefining asymmetric approach to chassis design delivers an unparalleled stiffness to travel to weight ratio that will have other engineers playing catch up for years. The Charger 2 Damper with DebonAir air spring delivers increased small bump sensitivity and mid-stroke support. The firm setting has also been re-tuned to better match RockShox rear shocks, with OneLoc compatibility which allows on-the-fly suspension control. - Charger 2 Damper with DebonAir spring - Lighter chassis with signature Pike stiffness - Fast Black coating on the upper tubes provides improved durability and decreased friction - Crown Race: 40mm - Offset: 46mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Travel: 160mm - Wheel Size: 27.5" , 27.5+ - Stanchion Diameter: 35mm - 27.5 x 2.8" maximum tire size
The RockShox SID World Cup has one focus—winning XC performance. The chassis and internals have been optimized for 100mm of travel and the one piece carbon crown and steerer tube cut every gram available. To tame the increasing demands of today's race courses the SID now features the Charger Damper in a purpose built XC tune with a firmer lockout for intense climbs. - An updated SID chassis drops weight and adds stiffness - Features the Charger Damper with Rebound, Lockout and low-speed compression adjustment - More tuning options with dedicated 100mm Solo Air spring - Features a 1 piece carbon fiber crown-steerer - OneLoc remote compatible - Factory tuned Dig Valve – mid-stroke support - Crown Race: 40mm - Offset: 42mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Maximum Tire Width: 81mm
The Öhlins RXF 36 fork drafts off of the success of the 34, while bringing more stiffness and room for bigger tires. It operates off of a three-chamber air spring design (two positive and one negative), and it utilizes proprietary TTX damping technology. Combined, this allows both parallel and separated oil flow that controls the overall pressure levels. In a practical sense, this means that the fork is guaranteed to remain high in the travel, while also ensuring smoothness and predictable bump absorption throughout the entire ride. The shape of the spring force is also capable of being adjusted, which allows riders more fine-tuning options for preferences like increased sensitivity without the threat of bottoming out. Öhlins has increased the stanchions to 36mm and upped the spacing to 110mm with an ultra-stiff two-piece alloy crown design. This means that it'll experience less flex for more tire control, while also trimming down on some weight. - Features a three-chamber air spring, with two positive chambers and one negative, allowing for an offset of spring pressure that perfectly mates stiffness with a plush, responsive ride quality. The shape of the spring curve can also be adjusted to increase sensitivity without bottoming out. - TTX (Twin Tube) damping enables separated oil flow, so the fork will always provide the perfect degree of pressure. This way, it stays smooth and high in the travel without compromising bump absorption, traction, or stability. - A tapered alloy steerer and high alloy two-piece crown ensure high stiffness and tire control with less chassis flex and chassis hysteresis. 36mm stanchions with 46mm offset for party time on the trail. - 150 and 170mm travel options available. - 15x110mm spacing.
Yari brings Lyrik’s acclaimed look and proven features – 35mm chassis, Fast Black upper tubes and DebonAir air spring – to a wider audience. The Motion Control damper features Rapid Recovery rebound, and its high-speed compression circuit is tuned to match the feeling of the Charger damper. - NEW "E-MTB" decal for Diffusion Black options - Chassis derived from Lyrik - Motion Control damping
The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. Offered in 26? and 700c wheel sizes, the fork’s new crown provides ample clearance for 700c x 50mm tires, and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube. - Axle-to-crown: 700c = 390mm - Offset: 45mm - Steerer: 700c (56–64cm frames) = 350mm - Tire Clearance: 700c x 45mm - Weight: 700c = 2.3 lb uncut
Salsa Cro Moto Grande Fork 29". - Disc only 29" rigid fork - Suspension corrected for 80mm travel fork - Maxle Included - Axle to Crown Length: 483 mm - Brake Mount (Fork): IS Disc Brake 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Material: Chromoly Steel - Offset: 45 mm - Wheel Mount Center Offset (mm): 0 - Steerer Tube Length (mm): 260 mm - Weight: 1080 g
- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks
- Replacement fork for fat bike builds - 7005 series aluminum alloy - Tire clearance up to 4.7" - Threadless tapered steer tube - Post mount 160 disc brake - Six M5 bottle/pump mount braze-ons - 135mm spacing - 1030g
The Whisky No.7 RD thru-axle fork is a thoroughly modern road fork for road bikes with tapered steerer tubes. It features a 12mm thru-axle for precise handling, clearance for high-volume road tires, and clean internal cable routing. Flat mount brake capability offers clean caliper fitment and backwards compatality with post mount brakes using adaptors.
The No.7 road fork features full unidirectional carbon construction, available in tapered or straight steerer tubes. - Full unidirectional carbon construction - Mid-Reach Caliper rim brake compatible - 35c max recommended tire size - ASTM Condition 2 - For off-road riding and jumps less than 12" - No rider weight limit - 5 year Whisky warranty - Accommodates road plus tires - Fender mounts
$27.99 - $31.99
• Cantilever brake mounts • 45mm rake • High-tensile steel construction • 1-inch steerer diameter (7/8-inch inner diameter) • Threaded fork
Introducing the Cane Creek Helm, a 7-way adjustable suspension fork optimized for 140mm to 170mm of travel. Born in the mountains of Western North Carolina, Helm is designed to conquer aggressive trail, enduro racing, and anything in between. By isolating each damping and air spring adjustment, the Helm has the ability to be tuned for all types of terrain and riding styles and gives the rider ultimate control of their suspension set-up. WEIGHT - 2070 grams DAMPING - High Speed Compression, Low Speed Compression, Low Speed Rebound ADJUSTMENTS - 7-way adjustable suspension fork - High speed compression - Low speed compression - Low speed rebound - Air volume adjust (8-position Internal indexed system) - Independent positive air spring - Independent negative air spring - Indexed travel adjust system SPRING - High volume positive and negative air springs STANCHION DIAMETER - 35mm TRAVEL - Positioned at 150mm, 160mm, or 170mm from factory Optimized for 140 - 170mm of travel TRAVEL ADJUSTMENTS - Internal, 10mm Increments (170mm down to 100mm) 2 Travel spacers included AXLE / SPACING / OFFSET - "D-Loc" 15mm thru axle system / 15mm x 110 BOOST spacing / 44mm
The one-piece carbon monocoque WCS Carbon Road Fork has been meticulously engineered and painstakingly built to perform with razor-sharp accuracy, and offer a comfortable yet lively riding experience. Built with High Modulus Fiber (HMF), this impeccable road fork offers superior strength and a superb road feel. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from crown to shaft and increased impact strength. The orientation of the fibers have been optimized to absorb and dissipate loads, which delivers a confident and comfortable ride. The fork also uses various fiber types to manage the different load types—such as side load, torsion, and impact— encountered at different parts of the fork. The WCS Carbon Road Fork includes a compression plug and fits up to 28c tires, depending on tire make and model. - 45mm crown is sized for integrated headsets, also looks good with conventional headsets - Designed so that the entire fork dissipates loads, reducing stress on the crown - Carbon monocoque construction with aluminum dropouts - Blade: Carbon - Crown: Carbon - Steerer: Carbon - Steerer Length: 300mm - Steerer Diameter: 1 1/8-inch - Rake: 43/46mm - Crown Diameter: 45mm - Axle-to-Crown: 368mm - Finish: UD Matte - Weight: 325g w/ uncut steerer
• Upgrade from crown adjust to remote adjust • Includes PopLoc remote lever (left) and compression damper • Available for Recon Silver, Sektor Silver, XC 32, and Paragon
Page 1 of 5 Next page