The classic Oury feel updated with lock-on from ODI. Bonus pack includes snap-caps and Lock Jaws. - Made by ODI - Snap-caps and Lock Jaws included - Flange: No - Lock On: Yes - Grip Shift Specific: No - Length: 120mm - Shape: Round - Weight: 84g
- Aluminum clamps secure the grip on both ends using a hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters, use 90mm replacement grip options for twist shifters)
Our Neutralizer Grips are scientifically tested to distribute pressure more evenly across the hand, while also offering a significant ledge for your fingers to perch onto. This, combined with our super-tacky grip material, results in maximum control and comfort. - Medically designed to conform to the hand's anatomy. This relieves pressure-related symptoms, such as pain and numbness, which often lead to fatigue. - Flat ledge under the grip provides enhanced grip. - Super tacky, yet durable, grip provides superior control. - Small/Medium diameter: 30mm - Large/X-Large diameter: 32mm
WTB's Dual Compound grips are perfect for XC, trail and comfort riding. They feature plush outer gel and tight, twist-resistant bases for comfort and control. And, the linked, diamond-shaped WTB logos and slightly raised centers provide an ergonomic feel and maximum grip in tough conditions.
Our initial partnership with Aaron Gwin produced numerous innovations that pushed grip technology to new levels. With the new AG2 Grips, we wanted to take things even further. We started with an ultra-soft pro compound and built it into an improved knurl pattern that provides extra tackiness and control along with reduced vibration transfer. We coupled this with our exclusive offset design that offers even more impact dampening where it is needed most, without increasing the grip diameter. We then redesigned the most impact-prone portions of the grips to provide an even better feel and accurate control when riding. - Grips feature a larger diameter than the original grips (30.5mm) with offset padding towards the rider for improved comfort - Soft Pro compound provides excellent shock absorption - Redesigned surface pattern for improved traction and vibration dampening - Redesigned ends provide an improved feel - Provide extra durability against grip blowout - Thin ribs add control without a bulky feel - Uses our race-proven Version 2.1 Lock-On system - Molded over the aluminum endcap, the end provides durability but will not gouge
$14.99 - $20.49
- Thick profile and raised square blocks with a sticky feel - 98 grams
SRAM Racing Grips offer a great grip for total control and come in several sizes to fit your front-end setup. These durable rubber grips have stylish logos stamped in them and are built to last and not slip.
The Charger Evo is the most complex grip we’ve ever created. Dual patterned textures on each grip allow riders to absorb shock and feel handlebar support with every move. The single compound grip with flange secures and protects the hand so athletes can focus on the road. Single Compound Grips include push-in plugs. - Length: 140mm - Weight (with plugs): 134 grams - Diameter: Medium (32mm)
Profile Design's Perforated Handlebar Tape offers grip, comfort, and a soft, suede feel.
The ESI Extra Chunky grips are the thickest available. 80 grams, standard grip length - 5 1/8", installed DIA. 34 mm, weight plus or minus 5%, 1 set of bar plugs included. - 80 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 34mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
Add a big dose of comfort and style to your ride with Profile Design's DRiVe handlebar tape. The plush padding and soft, textured grip offer an ideal blend of on-the-road comfort and minimal bulk.
- Dual compound design with a soft, grippy feel - Dual compound is made with Kraton/gel material for added strength and durability - Includes push-in plugs
- Developed in collaboration with 2x World Cup Champion Aaron Gwin - Ergonomic single clamp design with aluminum reinforced ends - Angled rib pattern matches the articulation points of your hand - Bonus pack includes Lock-On grips and v2.1 clamp
- Closed-end design protects end of handlebar while looking good - Compatible with Salsa Backcountry Grips only - 30g for pair
Our thickest bar tape is ideal for your next double century, gravel grinder or cyclocross race. Discover why our Pro Tour teams spec this tape for the Spring Classics.
Oury single compound grips. Simple & classic. - Soft grips with raised blocks - Flange: No - Lock On: No - Grip Shift Specific: No - Length: 114 mm - Shape: Round - Weight: 141 g
The Elite Flow grips feature an offset design that provides more padding in certain areas to eliminate the need for a thicker grip. - Single clamp design - Half-waffle pattern on the front of the grip provides extra control when you are off the back of the bike - Length: 130mm
ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand. - Offset grip design provides padding where it is needed most - Variable knurl pattern provides comfort/traction where you need it most - Version 2.1 Lock-On System - Soft Pro compound for excellent shock absorption - Reinforced soft ends for added durability - Super slim profile
The Cambium Comfort Grip! Organic cotton canvas is vulcanized and bonded to organic rubber to provide superior comfort and style. 100mm set for use with dual grip shifting systems and handlebars with shorter contact area, such as Brompton "M-Type" handlebars.
Realize the epitome of grip and control with our thinnest bar tape. Minimal padding allows for maximum feel and handling while carving the corners of your local criterium.
ESI's ergonomic Fit Grips are designed for a completely natural hand position on your handlebar. Our new designs balance the pressure that your hands exert onto the handlebars, increasing bar control dramatically. XC stands for Extra Chunky. - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
Balance is the key to optimum performance in a stage race. Experience the perfect blend of grip and comfort that teams AG2R La Mondiale Pro Cycling Team, Lotto Soudal and Movistar Team use to win in the pro peloton.
$10.99 - $11.99
The Cult Vans grips feature a classic Vans waffle pattern and are made by ODI in the USA using their proprietary rubber compound. - Made in the USA by ODI - Length: 150mm
- Grooved channels prevent mud and water buildup - Overmolded flap gives added protection on outside clamp - Unique undercut pads provide slim comfortable feel with maximum grip - Custom flanged design provides hand support with more usable grip surface
- 32.3Mm thick durasoft polymer (Dsp) - Micro-Chevron grip pattern for superior comfort, Feel and control - Ultra lightweight at 30 grams per set - Includes plugs and double sided tape
The classic Longneck ribbed grip pattern with an open end to accomodate end plugs now comes without a flange! - Classic mushroom style collapsible rib pattern - Constructed of our proprietary Soft Grip compound for added comfort - Increasingly popular with top athletes around the world - Open ends with black and white Two Color Push In Plugs end plugs included
WTB's Technical Trails feature built-in zip-tie channels to keep them stable in sloppy conditions. And, these slim grips are easy to cut and are compatible with trigger and grip shifters.
Extensive material research and design testing, plus expert and carefully detailed craftsmanship, have produced the ultimate standard in grip comfort and beauty. Anti-vibration large pad design eliminates numbness and slipping for any hand size. Made in the U.S.A. - Compatible with MTB, BMX, ATV, PWC - 5" long (127 mm) - 7/8" I.D. (22.25 mm) - 1.26" O.D. (32 mm) - 5 ounces (141.5 grams)
Mike “Hucker” Clark brings his SoCal attitude to life with the new Signature Hucker Grips. Designed for both aesthetics and performance. The 160mm grip’s California-inspired beach scene has been intricately laid out to provide traction and padding in key areas where they are needed most. - Features a unique two material design that allows for improved bar adhesion and less grip slippage - Soft vertical ribs provide excellent padding - Horizontal ribs on front of the grip offer improved traction
"O" Grips for BMX offer an improved feel right out of the box and improved traction from the multi-directional rib pattern. - New softer durometer compound offers improved comfort right out of the box - Multi-directional rib pattern provides excellent shock absorption - Thicker O-shaped ribs offer improved control - Includes Push In Style end plugs
Page 1 of 4 Next page