- Expanding replacement bar end plugs with hex bolt - Anodized alloy end caps - Compatible with most handlebar styles - 18.2mm OD expander/25.5mm OD end cap
Lightweight aluminum alloy - Non-Keyed - Height: 20mm - 10 to a bag
Origin-8's Pro Cable Guide Pulley fulfills all your special cable routing needs. Designed to clamp onto seat tube, it allows you to route your cable for bottom pull front derailleurs. Uses a sealed bearing pulley.
Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.
- Anti chain-suck device - Allows the front derailleur to be adjusted for strong downshifts - If not using front derailleur the device can act as a chain guide
- AL6061-T6 alloy seatpost clamp with an integrated adjustable cable guide - Ideal for routing brake and dropper post cables and housing - Chamfered edges and ovalized hole design protects carbon frames and seatposts - 31.8mm for 27.2mm seat posts and 34.9mm for 31.6mm seat posts - 16mm height
- Push-in replacement CNC alloy bar end plugs - MTB-specific design - Anodized alloy end caps - Compatible with most handlebar styles - 20mm OD plug/25mm OD end cap (Road) - 20mm OD plug/30mm OD end cap (MT
Converts braze-on front derailleurs to clamp-on. Available in multiple clamp diameters.
Forged AL6061-T6 alloy construction with CNC groove design - Machined insert for even clamping force - For use with carbon seat posts - Ultra-lightweight
Origin-8's Grip N Seal QR Seat Clamp is forged from light and durable aluminum and features a rubber weather seal and an anodized finish to prevent corrosion. Its high-leverage quick-release lever makes it easy to raise/lower your seat.
• 6061-T6 tubular aluminum construction • Laser etched graphics • Independent arm rest and bar adjustment • Does not include armrests • Cannot mount shifters onto ends • Clamp diameter: 25.4-31.8mm • Extension length: 105mm
Threaded headset keyed locknut washer - Bag of 10
Seatpost clamp with integrated cover prevents dirt and mud from entering the frame at the seatpost junction - Chamfered edges and ovalized hole design protects carbon frames and seatposts - AL6061-T6 alloy clamp with NBR cover - 31.8mm for 27.2mm seat posts and 34.9mm for 31.6mm seat posts - 16mm height
- Unidirectional carbon fiber 1-1/8" headset spacers - Sold in bags of 5
$5.95 - $6.85
- Machined AL6061 alloy construction - Center sleeve for use with Revolvr outboard bottom brackets - Converts 68/73mm outboard bottom bracket to a 100mm or 120mm fat bike model - Seals and protects the bearings from harmful contaminants - Center sleeve only: Revolvr outboard bottom brackets sold separately
Origin8's Twistr 15mm Top Cover is a high profile 15mm top cover for Origin8 Twistr Series headsets. This CNC-machined AL6061 top cover is sealed to keep moisture and grit away from the bearings.
- AL6061 alloy construction - Non-keyed design - Jar of 40 spacers
- Replacement pad set for Origin 8's Tri Clip-On Aero Bars
Origin-8's Pro Force QR Seat Clamp is forged and machined from light and durable aluminum and has an extra-leverage design to hold fast. This fine clamp boasts an anodized finish and a long quick-release lever for excellent clamping force. It also gives you more to hold onto so it's easier to raise/lower your seat.
Integrated spacer and top cap for use with star nuts and standard alloy steerer tubes - Provides a clean and lightweight stem cap solution - 6061-T6 alloy cap with 7075 alloy bolt
Expanding replacement bar end caps with hex bolt - Reflective silver graphics - Universal sizing fits most bar styles including Road and MTB - 18.2mm OD
Standard replacement star nuts for threadless steerers.
• Chain tensioner w/integrated derailleur hanger • Fits most 3/8-inch horizontal dropouts
Origin-8's Down Tube Shifter Adapter is perfect for mounting down tube style shift levers on a bicycle that doesn't have provisions on the frame for them. It's made of light and durable machined aluminum with an anodized finish and fits frames with 1 1/8- to 1 1/4-inch diameter down tubes. Mounting hardware and shims are included.
- Provides enhanced chain retention for all 1x drivetrain systems - CNC machined AL6061 alloy mount with dual-compound chain guide - Co-molded composite and TPR guide plates greatly reduce noise from chain contact - Compatible with 28-38T circular and 26-36T oval chainrings - Boost-compatible - Easily adjustable - Mounting hardware included
• Machined alloy arm • (ISCG Mount) international standard • Adjustable design • Sealed cartridge bearing • Prevents dropped chains on mountain bikes
• Emergency universal replacement derailleur hanger • CNC machined aluminum construction • Anodized and laser etched finish
- Anodized or powder coated finish - Allows for secure clamping - Forged aluminum construction - 34.9mm clamp diameter
This is a bottom bracket adapter that works in conjuction with Origin8 Revolvr BB86/92 Thread-Together bottom brackets to create a PF121 Thread-Together bottom bracket. - Cup Material: AL6061
Origin-8 1mm Disc Brake Washers. Works with most disc brake calipers. Ideal for mounting/spacing applications. - Stainless steel - 6mm I.D. - 10 per bag
Page 1 of 2 Next page