Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Surly

Surly Logo T-Shirt
$30.00
Shirts are a color, sometimes it's black, or green, or red, or gray or one they haven't picked yet. Printed Surly logo on the front is a different color, usually black or white.
Surly 10/12 Adapter Washer for Solid Axle
$15.00
Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.
Surly TV Tray
$65.00
We designed the Surly TV Tray to help riders boost the capacity of their current rack setups. Designed for easy pairing with nearly all Surly racks and most other racks on the market, mount this sturdy aluminum platform on top of your current rack to provide a footprint large enough for 30 lbs. of beef jerky, 9-volt batteries, used pinball parts, or whatever else you might need to haul. Available in dark black. - Load weight limit 30 lbs. - 15-3/8 x 10-inches - Rack weight 650g - 6061-TB Aluminum - Not compatible with Surly 24-Pack Rack or Wide Rear Disc Rack - Mounting Hardware Included
Surly Truck Stop Handlebar
$70.00
Designed to combine what’s good about drop bars with the benefits of a riser, the Truck Stop Bar offers welcome relief to the road-weary traveler. Just like with a standard drop bar, you’ll have multiple hand positions at your disposal so you can stay comfortable and in control for the long haul down the Big Slab. And if it’s a more relaxed, upright riding position you’re after, 30mm of rise will get you there. So, if you’ve accidentally or intentionally cut your steer tube too short, here’s your chance at redemption. Also suitable for taller riders who’ve exhausted all other options for rise, it comes in three widths of 42, 45, and 48cm. Lightweight aluminum construction, CB radio not included. Specifications: - Material: Aluminum - Clamp Diameter: 31.8mm - Width: 42cm, 45cm, or 48cm - Rise: 30mm - Sweep Angle: 12 degrees - Color: E.D. coated black
Surly Cycling Cap
$35.00
Surly's Cycling Cap is their modern-yet-old-school take on a classic piece of riding wear. It's comfy in a huge range of temps and fights sweat and odor thanks to 100% wool construction. It works good, feels good, and looks good. What more could you want?
Surly Long Sleeve Men's Jerseys
$165.00
Once long ago, wool was the material of choice for cycling clothes and other active clothing. In the 80s, synthetics began to replace wool because they were new and shiny and stretchy and you could sublimate flashy, detailed graphics onto them which was a nifty thing for teams and shops. Even while synthetics enjoyed their era of dude-holding-the-bong popularity, however, wool did not die off. It still offered some really great features, like great moisture control and a resistance to putrescent reek. Our jerseys are an excellent example of wool done well. We've tried hard to produce something we hope will become your favorite piece of cycling clothing. Our long sleeve jerseys are made from medium-weight Merino wool. Merino fibers are soft and non-irritating even on sensitive skin. The fabric weight makes them suitable for cool weather to cold weather. They have a high collar to help keep the cold out and the warm in, and feature long body and long sleeves. The sleeves have reinforced thumb holes to help make sure they stay all the way down as you ride. Like our short sleeve jerseys they feature a full length zipper and a reinforced rear pocket with zippered access on both sides.
Surly Whip Lash Gear Straps
$20.00
Suitable as a tourniquet or stylish headband in a pinch, the Whip Lash's primary function is to help you attach whatever needs attaching to your bicycle frame. Available in a multi-pack that includes two 550mm lashes and one 695mm lash, the Whip Lash's potential is limited only by your imagination. You could use one to strap your beverage to the down tube when the trail says you ought to keep your hands on the bars. Or you could use another to fix your fishing gear to the top tube when rack space is maxed out. Whatever you get into on or off the bike, they're handy to have around because they're light, compact, and easy to use. Rubberized on one side to keep your stuff from slipping around, the Whip Lash's trimmable design features nylon construction and a simple hook-and-loop style closure.
Surly Hurdy Gurdy
$35.00
Hurdy Gurdy is another nifty device that keeps a rear wheel from slipping forward in the dropout under pedal load. It's designed for the Cross-Check's semi-horizontal front-loading dropouts, and will also work on many other similar dropouts. Hurdy Gurdy is investment cast of stainless steel for durability and good looks, and shares many of Tuggnut's design features. Its two axle holes allow for a wide variety of fore/aft wheel positions, it will work with standard QRs, bolted axles, and nutted axles up to 10mm.
Surly Merino Scarf
$40.00
The Surly Merino scarf is an open, rectangular band of warm and cozy wool fabric that will swaddle your neck and face. - Wool resists odor, wicks and is an excellent insulator - Dimensions: 13 x 60"
Surly Tuggnut Chain Tensioner
$30.00
If you've got rear-facing horizontal dropouts and you don't want your chain to slip when your rear wheel pulls forward, then Surly's got you covered. The Tuggnut is made from investment-cast stainless steel and it'll hold your wheel in place. Plus, it comes with an adapter for quick release axles and features an integrated bottle opener.
Surly Jethro Tule
$26.00
The Surly Jethro Tule rocks. It's made from tough, polished stainless steel and sports dual-purpose functionality. One end is the 15mm offset box end wrench you need to take your wheels off. While the other end provides stellar leverage and a bottle opener! That's two of the tools you need, in your pocket, all the time.
Surly Open Bar Handlebar
$55.00
Surly's Open Bar Handlebar is the go-to option for a good time. It features lots of space for grips, shifters, brake levers, or any combination of the a fore mentioned. The swept-back angle is comfortable for your wrists, and the stout chromoly construction is durable yet compliant. It's at home on bike paths or neighborhood cruises, and at an ominous 666mm, it's even wide enough to tackle some singletrack.
Surly Kickstand Plate
$15.00
Surly made these handy plates for use with either the Long Haul or Disc Trucker frames, and only the Long Haul and Disc Trucker frames. They are to be used with a bicycle kickstand to keep your bicycle upright while not moving as if by magic. The plates consist of two halves that, when clamped on your frame in conjunction with a kickstand, protect your chainstays from hamfisting by sandwiching the frame between the plates. Have you ever eaten a hamfist sandwich? They taste terrible, so avoid them like the plague. - Compatible with 2019 and older Long Haul and Disc Trucker frames
Surly Stainless-Steel Chainring (104mm BCD)
$35.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.2 - 2.3mm thick so they work well with wider chains.
Surly Moloko Handlebar Bag
$65.00
The Moloko Adjunct Personal Effects Receptacle is made from urethane-coated nylon canvas and designed to fit in the center of the Surly Moloko Bar. It has space for essentials and can easily be accessed while riding. - Constructed from urethane-coated nylon canvas to provide water-resistant protection - Elastic cord on top snuggly secures extraneous loose items like wrappers or gloves - Integrated light port allows a battery cord to pass through - Dimensions: 254 x 90 x 90mm
Surly Track Cog
$35.00
Machined from heat-treated, chrome-plated chromoly, these seriously tough cogs will hold up to massive track sprints and crazy skid-stops. Surly's Track Cogs are strong, shiny and they come in two widths and sizes from 13T to 22T so you can select the perfect gear.
Surly 8-Pack Rack
$130.00
Most of you don’t need the cargo capacity to land a helicopter on your rack. Sometimes, all you want to do is grab a sixer from the beer store on the way home, or pick up a nice bouquet of flowers. For whatever the situation dictates, Surly offers the 8-Pack Rack. Made from the same tubular cromoly steel as their front and rear touring racks, the 8-Pack Rack is a solid pedestal upon which you may rest a handlebar bag, grocery bag, minaudiere, satchel…or whatever you use to carry your bowling ball around. The 8-Pack Rack attaches to most forks with mid-blade and crown eyelets. It uses stainless steel hardware and has the characteristic durability, versatility, and repairability all Surly products are known for. The 8-Pack Rack has lots of barrel braze-ons, so you can customize your cargo tie-downs…or just bolt on as many lights as you can possibly find. It’s rated to carry up to 30lbs (13.6 kg) and comes in black or silver.
Surly Trailer Hitch/Yolk Assembly (trailer sold separately)
$325.00
Surly's Trailer Hitch/Yolk Assembly is the correct hitch for Surly's Bill and Ted Trailers (sold separately). This fine chromoly hitch securely and quickly attaches to your bike using the included proprietary quick-release skewer. Or, if you have a bolt-on rear wheel, you just bolt the hitch onto your rear axle. The hitch fits most bicycles whether they feature full suspension, disc brakes, rear racks and fenders, or you name it. And it works with bicycles with wheels as small as 20 inches and as large as 29 inches, while always keeping the trailer bed level with the ground. The hitch also adjusts to accommodate rear hub widths from 120 to 145mm and allows you to align the centerline of the trailer on the centerline of the bike for easy pulling. Maybe best, the hitch lets you remove the trailer quickly and easily when you don't need it. Plus, by putting hitches on all your favorite bikes you can easily move the trailer between bikes!
Surly Wingnut Women's T-Shirt
$30.00
The T-Shirt has been turning the blank, ennui-inducing human chest into an exciting billboard since the 19th century. This tee offers a comfortable cotton fit.
Surly Logo Long-Sleeve Tee-Shirt
$28.00 - $40.00
Shirts are a color, sometimes it's black, or green, or red, or gray or one we haven't picked yet. Printed Surly logo on the front is different color, usually black or white.
Surly Men's T-Shirt
$28.00
The T-shirt has been turning the blank, ennui-inducing human chest into an exciting billboard since the 19th century. The new Surly Shirts run on the long side, so your butt won't hang out when you ride. Please check the fit chart for sizing information.
Surly Singleator Wrench
$10.00
The Surly Singleator Wrench is made from leftover stainless steel and serves two important functions: its 18mm wrench is perfect for adjusting the tension on your Singleator, and it opens bottles. Seriously. What a great way to reduce, reuse and recycle.
Surly Ride Loaded Patch
$4.00
It’s a little cloth patch that you can patch stuff with, or sew on a hat, if you are so inclined. For bed or for the ride, it’s the perfect accessory for the fashion conscious. - Customize Surly gear and clothing with Surly patches - Several different sizes and styles available - Dimensions: 4.25x1.38
Surly Ultra New Hub Axle Kit
$28.82 - $34.15
Surly Ultra New Axle Kits are for upgrading the internals of your existing Surly New hubs or replacing the internals on your Surly Ultra New hubs. -Compatible with Surly New hubs (upgrade kit) and Surly Ultra New hubs (replacement kit) - Each kit contains an axle, two 6901 cartridge bearings, two aluminum dust shields, two stainless steel cones, two stainless steel 6x1mm bolts, and two stainless steel bolt washers - Axle is quick release and bolt-on compatible; bolts included, QR is NOT included - Standard Surly New hubs come stock with 7901 bearings; this kit uses 6901 bearings which are non-angular
Surly Wednesday Fork
$175.00
Surly's Wednesday fork is made of the same 4130 CroMoly steel as its frame counterpart. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It features many accessory barnacles (or braze-ons if you prefer to speak in "official" terms) like barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. - 15mm x 150mm thru-axle - Butted and tapered blades - Barrel bosses at the dropouts and crown - Mid-blade thru-blade eyelets - Triple bottle bosses on both fork legs - Fits tires up to 5.25" wide - Axle-to-crown: 468mm - Offset: 47mm - Steerer: 260mm, 1-1/8-inch straight - Tire Clearance: 26 x 5.25-inch - Weight: 1262g
Surly Dirt Wizard 27.5-inch Tubeless Ready
$80.00 - $90.00
Our family of Dirt Wizards is highly-focused – one might even say spellbound – on providing traction and control on the kinds of surfaces where nary traction nor control are to be found. Its tread is comprised of a dual row of aggressive, trail-gobbling, beveled knobs in the center and well-spaced, siped knobs to dig into loose corners. Designed to work on 50mm rims, Dirt Wizards are tall and wide, providing next-level traction and cushioning. The casings have been designed to be flexible and responsive, yet durable and supportive. Minimum rim size for these naughty little wizards is a 35mm outer rim width. - Folding bead - Casing: 60 TPI - Max pressure: 30psi
Surly Rim Strip
$5.00
If you make huge rims you have to make huge rim strips too, and that's exactly how Surly's Rim Strip came to be. Made of PVC and available in 3 colors it protects your tube from the inside of the rim with stylish simplicity.
Surly Raglan Shirt
$65.00
Sometimes you need a little more than a cycling jersey and other times you need a little less. Enter our new wool raglan shirts. We took the same reasons and philosophy behind our wool jerseys and applied them to our new wool shirts. Lightweight and comfy, our merino wool raglan shirt is perfect for layering to help wick moisture or add a pinch of warmth. When it’s hot out, wear one solo to keep yourself high and dry.
Surly Ogre Decal Set
$16.00
Surly Ogre frame decals in a couple colors. - 100% awesome - Dry transfer style - Includes headbadge
Surly Big Easy
$5,249.00
Riding with cargo is core to Surly's mission on this earth, whether you’re running a front rack and bag setup or a full-blown cargo bike and trailer. There are times, however, when even the strongest riders are limited in what they can haul, so Surly created Big Easy, their long-tail electric cargo bike. Consider it the 18-wheeler of the cargo bike world, minus the diesel fumes. When it comes to geometry, Big Easy rides and feels like a normal-length bike. It has increased stand-over height clearance and they threw in a dropper post to promote bike sharing across different-sized riders. So, whether you want to wave goodbye to the old family gas hog, upgrade your bike-supported business’s two-wheeled fleet, or simply haul more bowling balls during your daily commute, Big Easy makes doing all that, well, easy. - Full component set perfectly suited for electric cargo bikes, including four-piston Tektro brakes - Equipped with Bosch Performance CX, their most powerful drive unit - Capable of running dual batteries for extended range, if you’re into that. (All mounting hardware and wiring included.) - Damping headset provides smooth and stable handling characteristics under heavy loads - Condensed bike size range and dropper post routing to promote bike sharing and to accommodate more riders per frame size - Includes Bosch Standard 4A charger, wiring harness, and brackets for additional battery
Surly MDS Dropout Chips
$33.50 - $50.00
The 12mm slotted MDS dropout is the newest chip for Surly's MDS equipped trail frames. You like chips, don't you? The 12mm slotted dropout chip uses a standard derailleur mount for maximum compatibility and is made of cast and machined 6061-T6 aluminum, with a fender eyelet. What's the coolest part about the 12mm slotted MDS chip, you ask? The fact that it also has the capability to run a 12 x 142mm thru-axle in a single speed configuration. This is good news because single speeds are good news. When you get an MDS equipped frame you're getting the option to set it up however you want. You can run a 142 x 12mm thru-axle rear end with a direct mount Shimano hanger, standard 135mm QR or The Mighty Singlespeed. The way this will work is that Surly complete bikes that feature the MDS will ship with whatever chip is compatible with derailleur spec. For instance, the complete Instigator 2.0 ships with the 142 x 12mm thru-axle Shimano chip. If you want to change it to a singlespeed later (and why wouldn't you?), all you have to do is get the SS chip. Frames will ship with all three MDS chips so pick your poison. The 142 x 12mm and 135mm QR chips are made of cast and machined 6061-T6 aluminum and The Mighty Singlespeed chip is 304 stainless steel, because the two words 'aluminum' and 'singlespeed' should never be too close to each other. Bad things can happen…. As you can see, the MDS gives you not just different build options, it lets you use a more varied selection of parts for your frame up builds. The MDS is featured on most of our trail bikes. That's right: Krampus Ops, Karate Monkey Ops, Instigator 2.0 and Ice Cream Truck frames all sport these puppies.
Surly Stainless-Steel Chainring (110mm BCD)
$35.00 - $65.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications.
Surly Cross Check Frame Replacement Dropout Screws
$6.00
Replacement dropout screws for the Surly Cross Check. - Bolt length: 40mm
Surly 10/12 Adapter Washer for QR
$15.00
This fine pair of Surly 10/12 Adapter Washers is designed to adapt any 135, 170, or 190mm O.L.D. QR axle hub with a 142, 177 or 197mm spaced thru-axle frame. Make sure the QR axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.
Surly Space Station T-Shirt
$30.00
The T Shirt has been turning the blank, ennui-inducing human chest into an exciting billboard since the 19th century. Please check the fit chart for sizing information.
Surly Ultra New Disc Rear Hub
$100.00
Surly's Ultra New Disc Rear Hub is just the thing for singlespeed fanatics and one-gear mountain riders. This gorgeous hunk of aluminum boasts reliable sealed bearings and a 6-bolt disc attachment on one side and threads for a singlespeed freewheel (or fixed cog) on the other. A hollow axle lets you choose how to secure it to your dropouts. You have choice between the included fixing bolts or a quick release skewer (sold separately). And, that aforementioned chromoly axle is flex-free to take all the abuse you can dish out, and then some!
Surly Tall Socks
$30.00
That's right, Tall Socks. No fancy name here, it's the Surly way. What they lack in flash and flair, they make up in awesomeness. They're made from Merino wool for the perfect pairing of breathability and durability. They keep your feet comfortable in any temperature, even when wet, and they cover your shins. What more do you need?
Surly Logo T-Shirt
$30.00
Shirts are a color, sometimes it's black, or green, or red, or gray or one they haven't picked yet. Printed Surly logo on the front is a different color, usually black or white.
Surly Big Dummy Frameset
$1,099.00
Big Dummy is a long-tail cargo bike, which means that not only can you haul a serious amount of cargo, different accessories can be added to your Big Dummy frame and deck depending on what you want to carry. Being a dedicated single-piece frame, instead of an add-on to an existing bike, it's stiffer and resistant to torsional flex, which provides a better ride and longer lasting frame than long-tail add-ons. Like all Surly's frames, it's made of their size specific, 4130 CroMoly steel – a tube set engineered for cargo that sports lots of little touches that you've come to love in a Surly, like clearance for big tires and the use of common component sizes. Figure on being able to carry about 200 pounds (90kg) of cargo. The load weight, and how it's loaded, will affect the handling somewhat. Also, plan on using gears, especially as cargo weight increases. This may seem obvious, but as you get comfy with it, you will use your full range of gears as never before. It's suitable to loaded as well as unloaded riding. Bags, deck, rails, and rail collars are all designed to improve on previous offerings and work together to make sure your stuff is transported with safety and stability. It's an unbending interface, which when you're carrying lots of cargo, is a good thing to have. Get creative, and get hauling. If you intend to carry a passenger on your Big Dummy, Surly requires use of their Dummy Rail Collars. These provide a secondary retention system for the rack, as well as stiffen the rack system. These are included with MY17 Big Dummy bikes and frames, as well as available AM for older Big Dummy bikes and frames (compatible with all generations of Big Dummy bikes/frames). In addition, a stoker handlebar set up, found on tandem bicycles, is recommended as well. Make sure to check with seat post manufacturer for stoker handlebar compatibility. If you are planning to carry a child on your Big Dummy, Surly recommends the use of a child seat. They've tested the Maxxi Yepp seat. Yepp makes an adaptor that allows their seat to mount onto Surly's deck. It works well with the Big Dummy. At this time other child seats are not recommended and will void your warranty. Surly is testing other options. Note: keep in mind Big Dummy weight limits when carrying a passenger.
Surly Wool Pocket T-Shirt
$85.00
Who doesn't like t-shirts? Idiots, that's who. What's not to like? You can wear them all the hours of the day. They work equally well in the shower as they do in the pool. They function as both daywear and eveningwear. Surly tripled its functionality by adding a pocket. A POCKET!!! Now they've taken that infinitely versatile garment (it's the Cross Check of Clothes) and had it made out of (what Surly would call our their favorite material) merino wool (after steel and rubber, silly). In short, it's a t-shirt, it's wool, it's got a pocket (A POCKET!!), you wear it. Donzo.
Surly ECR Fork
$130.00
The ECR fork is much like the Ogre fork. Both are CroMoly 29er forks. Both work with frames designed for 80mm-travel suspension forks. Both feature 51mm I.S. disc caliper mounts, brake line guides, accommodations for a rack and fender, and 2 sets of cage mounts (one on each leg) that let you mount large size or standard water bottle cages. Both are designed to run just about any combination of parts and accessories you'd want on a fork and are finished in durable black powdercoat. The only real differences are 1) ECR is disc brake only, and 2) ECR's offset is 47mm, 5mm more than Ogre's. - Axle-to-crown: 468mm - Offset: 47mm - Steerer: 260mm, 1-1/8" straight - Tire Clearance: 29 x 3.0" - Weight: 3.1 lb (1.4kg) uncut
Surly Stainless-Steel Chainring (94mm BCD)
$35.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.2 - 2.3mm thick so they work well with wider chains.
Surly Thru Axle
$30.00 - $33.00
Surly's low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames. Not sure which one fits your bike? Get in touch, and we'll ensure you're choosing the correct axle for your application.
Surly Space Station T-Shirt
$30.00
The T Shirt has been turning the blank, ennui-inducing human chest into an exciting billboard since the 19th century. Please check the fit chart for sizing information.
Surly Disc Trucker Thru-Axle Fork
$175.00
Like its QR cousin, the Disc Trucker Thru-Axle Fork is designed to mount racks and fenders and haul your worldly possessions. It's also got modern touches like dynamo routing, compatibility with flat-mount disc brakes, and three-pack mounts on both fork blades to satisfy your deepest cargo desires. Captured 12mm thru-axles make tool-free removal and installation possible. Offered in 26" and 700c wheel sizes, the Thru-Axle fork clears 26 x 2.1" or 700c x 47mm tires. With a 1-1/8" steerer, it's powder-coated and constructed using the same Chromoly steel as all our other frames and forks. Why? Because we swore a blood oath to steel and we intend to keep it. Note: The Disc Trucker TA Fork is designed to pair best with second-generation Disc Trucker models—those first released in 2020. Defy this guidance at your own peril. 26 Inch - Axle-to-crown: 376mm - Offset: 45mm - Steerer: 42–54cm frames = 300mm, 1-1/8" straight - 56–62cm frames = 400mm, 1-1/8" straight - Tire Clearance: 26 x 2.1" (with or without fenders) 700c - Axle-to-crown: 390mm - Offset: 45mm - Steerer: 56–64cm frames = 350mm, 1-1/8" straight - Tire Clearance: 700c x 47mm (with or without fenders)
Surly Dummy Bag D-Ring and Velcro Strap
$5.00
Spruce-up a well-loved Dummy bag with replacement parts from Surly.
Surly Grub Screw for Hitch Mount Nut
$8.00
Surly Trailer Parts - Attaches with proprietary mounting skewer (included) or proprietary mounting nuts for compatible frames (i.e. Surly Troll, Ogre, etc.)
Surly Big Dummy Frame Decal Set
$16.00
Stickers/Decals for repairing or repainting your Surly Big Dummy. - Includes headbadge
Surly Natch T-Shirt
$30.00
The T Shirt has been turning the blank, ennui-inducing human chest into an exciting billboard since the 19th century.
Surly Surly Patch
$6.00
It's a little cloth patch that you can patch stuff with, or sew on a hat, if you are so inclined. For bed or for the ride, it's the perfect accessory for the fashion conscious.
Surly Midnight Special 650b Fork
$175.00
This beauty here was designed alongside Surly's Midnight Special frame. In an effort to shed a few grams (it's for a road bike after all), they opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice — don't you think? Like the Midnight Special frame, this fork is equipped with modern road standards like flat mount disc brakes and a 12 x 100mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets - Rack and fender eyelets at the dropout - 12 x 100mm thru-axle - Clearance for 27.5 x 2.32 or 700c x 42mm tires
Surly Midnight Special Road Fork
$175.00
This beaut here was designed alongside our Midnight Special Frame. In an effort to shed a few grams (it's for a road bike after all), we opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice—don't you think? Now, we don't throw the phrase "future-proof" around lightly, so we won't use it here either. What we will say is that, like the Midnight Special Frame, this fork is equipped with modern road standards like flat mount disc brakes and a 100mm x 12mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - Axle-to-crown: 400mm - Steerer: 350mm, 1-1/8" straight - Tire Clearance: 27.5" x 2.32" or 700c x 42mm (27.5 x 1.95" or 700c x 38mm w/fenders) - Weight: 1254g
Surly Straggle-Check Frame Bag
$195.00
Dubbed 'Straggle-Check' frame bags, these bags are designed to fit both 700c and 650b Straggler and 700c Cross Check frames. Size up one size on your bag if you've got a 650b Straggler frame and voila, it fits. These are handmade by Revelate Designs in the U.S., made of Dimension Polyant VX 21 polyurethane coated fabric. It's durable, rip resistant, tightly woven and laminated to make it highly water resistant but not fully waterproof…. Revelate advises using stuff sacks inside (such as the one in which our bags are packaged) if you risk riding in extended downpours or underwater. Surly's Straggle-Check frame bags (as well as their mountain bags) are now using a ladder strap system, which allows greater flexibility in how you attach the bag to your frame. The ladder straps let you customize the fit and placement of the mounting straps so if you have some weird contraption clamped to your frame tubes like a chain keeper, cable pulley, or some trinket grandma gave you, it won't interfere with the mounting straps on the frame bag. They're also including foam bumpers for the mounting straps to minimize thread abrasion to the bag and attachment points Quality YKK brand water resistant zippers – with an improved, water resistant zipper 'garage' – control compartment access and help keep the weather out. Zippers are sewn with a stretch panel to relieve stress on the zipper as well. Stress even kills zippers. The large main compartment has a flexible divider inside, and there's a hydration port to make sure your whistle stays wet. There's also a compartment suitable for smaller items you'll access relatively often, like your map, phone, hard boiled eggs, uncontained pudding, marbles for playing marbles, your dugout, that ring you found that makes you disappear when you put it on, or whathaveyou. Frame bags such as this are light and reasonably voluminous. They are stable because they center weight low between your wheels and body, and they go places where racks and panniers are often troublesome, like singletrack. Note: due to the rough texture of the mounting straps, prolonged use may lead to scratched or worn paint. If you're worried about keeping everything looking pristine you probably ought to look for some other type of bag, or figure a way to protect the paint, such as duct tape, or tatting a top tube doily - for example.
Surly Ultra New Disc Front Hub
$85.00
Surly's Ultra New Disc Front Hub is a gorgeous hunk of aluminum that boasts reliable sealed bearings and a 6-bolt disc attachment. The forged chromoly axle is flex-free for steering precision, long-lasting durability and simple quick-release compatibility.
Surly Trailer Thumb Screw w/Spring
$8.00
Surly Trailer Parts
Surly Front Rack Plate Kit
$12.50
Surly Front Rack Hardware
Surly O.D. Enduro Press Fit Bottom Bracket
$70.00
Surly OD Bottom Brackets - PF cups are 41mm in diameter - Bearing I.D. is 24mm - OD bottom bracket comes with telescoping center sleeve for added durability - High quality double labyrinth sealed stainless Enduro bearings with corrosion resistant coating - 3 additional 1mm spacers are provided to help with chain line and crank arm clearance
Surly Troll Fork Non-Suspension Corrected
$130.00
The Troll Fork is just like the one that comes with the Troll frame, a 26-inch wheeled fully geared utility bruiser and cruiser. Like all Surly's forks, it's constructed of CroMoly steel. It sports removable rim brake pivots as well as a 51mm disc caliper mount. The Troll Fork is designed to accept a rack while using a disc brake, via through-blade threaded mounts in two places on each fork blade, and it's even got fender eyelets. - Disc or rim brake compatible - Compatible with disc brakes and rack simultaneously - Fits 26-inch wheels with clearance for a 3.0-inch tire - Steerer Type: Straight 1-1/8-inch - Sleek powdercoat finish
Surly Dr. Chromoly's Elixir T-Shirt
$28.00
The T-Shirt has been turning the blank, ennui-inducing human chest into an exciting billboard since the 19th century. Please check the fit chart for sizing information.
Surly Assistant Executive Director Trucker Hat
$30.00
A classic Surly Trucker Hat with a mesh back, plastic size adjustment band, and a patch on the front. Imagine all the places you'll wear it. - One size fits most with snapback adjustability - Embroidered patch - Pre-curved bill
Page 1 of 3 Next page