Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Surly

Surly O.D. Enduro Bottom Bracket
$70.00
Surly OD Bottom Brackets - Compatible with 24mm spindles - Moonlander BB fits a 100mm bottom bracket shell, but exterior width conforms to BB121 standard
Surly Thru Axle
$30.00 - $33.00
Surly's low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames. Not sure which one fits your bike? Get in touch, and we'll ensure you're choosing the correct axle for your application.
Surly 10/12 Adapter Washer for QR
$15.00
This fine pair of Surly 10/12 Adapter Washers is designed to adapt any 135, 170, or 190mm O.L.D. QR axle hub with a 142, 177 or 197mm spaced thru-axle frame. Make sure the QR axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.
Surly Wingnut Women's T-Shirt
$30.00
The T-Shirt has been turning the blank, ennui-inducing human chest into an exciting billboard since the 19th century. This tee offers a comfortable cotton fit.
Surly Space Station T-Shirt
$30.00
The T Shirt has been turning the blank, ennui-inducing human chest into an exciting billboard since the 19th century. Please check the fit chart for sizing information.
Surly Disc Trucker Thru-Axle Fork
$175.00
Like its QR cousin, the Disc Trucker Thru-Axle Fork is designed to mount racks and fenders and haul your worldly possessions. It's also got modern touches like dynamo routing, compatibility with flat-mount disc brakes, and three-pack mounts on both fork blades to satisfy your deepest cargo desires. Captured 12mm thru-axles make tool-free removal and installation possible. Offered in 26" and 700c wheel sizes, the Thru-Axle fork clears 26 x 2.1" or 700c x 47mm tires. With a 1-1/8" steerer, it's powder-coated and constructed using the same Chromoly steel as all our other frames and forks. Why? Because we swore a blood oath to steel and we intend to keep it. Note: The Disc Trucker TA Fork is designed to pair best with second-generation Disc Trucker models—those first released in 2020. Defy this guidance at your own peril. 26 Inch - Axle-to-crown: 376mm - Offset: 45mm - Steerer: 42–54cm frames = 300mm, 1-1/8" straight - 56–62cm frames = 400mm, 1-1/8" straight - Tire Clearance: 26 x 2.1" (with or without fenders) 700c - Axle-to-crown: 390mm - Offset: 45mm - Steerer: 56–64cm frames = 350mm, 1-1/8" straight - Tire Clearance: 700c x 47mm (with or without fenders)
Surly Cross Check Frame Replacement Dropout Screws
$6.00
Replacement dropout screws for the Surly Cross Check. - Bolt length: 40mm
Surly Big Dummy Frame Decal Set
$16.00
Stickers/Decals for repairing or repainting your Surly Big Dummy. - Includes headbadge
Surly Ogre Decal Set
$16.00
Surly Ogre frame decals in a couple colors. - 100% awesome - Dry transfer style - Includes headbadge
Surly Logo T-Shirt
$30.00
Shirts are a color, sometimes it's black, or green, or red, or gray or one they haven't picked yet. Printed Surly logo on the front is a different color, usually black or white.
Surly How We Roll T-Shirt
$30.00
The T-Shirt has been turning the blank, ennui-inducing human chest into an exciting billboard since the 19th century. Please check the fit chart for sizing information.
Surly Stainless-Steel Chainring (94mm BCD)
$35.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.2 - 2.3mm thick so they work well with wider chains.
Surly Krampus 110 Fork
$175.00
Designed around Surly's updated Krampus frame (but also employed on the updated Karate Monkey frames as well), this fork has 15mm thru-axle dropouts spaced at 110mm and clearance for up to a 29 x 3.0-inch tire. To accommodate such big tires it's got a longer axle-to-crown measurement than our Ogre or Karate Monkey forks, making it a perfect rigid fork option for lots of 29ers out there. The Krampus fork's blades were designed and manufactured specifically to play well with the unique forces such a long fork with big tires will encounter, and the steer tube is standard 1-1/8-inch threadless. It has line guides for a disc brake line as well as thru-blade eyelets and Three-Pack bosses on both fork legs. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm - Tire Clearance: 29 x 3.0-inch - Weight: 1180g uncut
Surly Assistant Executive Director Trucker Hat
$30.00
A classic Surly Trucker Hat with a mesh back, plastic size adjustment band, and a patch on the front. Imagine all the places you'll wear it. - One size fits most with snapback adjustability - Embroidered patch - Pre-curved bill
Surly TV Tray
$65.00
We designed the Surly TV Tray to help riders boost the capacity of their current rack setups. Designed for easy pairing with nearly all Surly racks and most other racks on the market, mount this sturdy aluminum platform on top of your current rack to provide a footprint large enough for 30 lbs. of beef jerky, 9-volt batteries, used pinball parts, or whatever else you might need to haul. Available in dark black. - Load weight limit 30 lbs. - 15-3/8 x 10-inches - Rack weight 650g - 6061-TB Aluminum - Not compatible with Surly 24-Pack Rack or Wide Rear Disc Rack - Mounting Hardware Included
Surly Logo T-Shirt
$30.00
Shirts are a color, sometimes it's black, or green, or red, or gray or one they haven't picked yet. Printed Surly logo on the front is a different color, usually black or white.
Surly Stainless-Steel Chainring (110mm BCD)
$35.00 - $65.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications.
Surly Dirt Wizard 27.5-inch Tubeless Ready
$90.00
Our family of Dirt Wizards is highly-focused – one might even say spellbound – on providing traction and control on the kinds of surfaces where nary traction nor control are to be found. Its tread is comprised of a dual row of aggressive, trail-gobbling, beveled knobs in the center and well-spaced, siped knobs to dig into loose corners. Designed to work on 50mm rims, Dirt Wizards are tall and wide, providing next-level traction and cushioning. The casings have been designed to be flexible and responsive, yet durable and supportive. Minimum rim size for these naughty little wizards is a 35mm outer rim width. - Folding bead - Casing: 60 TPI - Max pressure: 30psi
Surly Tall Socks
$30.00
That's right, Tall Socks. No fancy name here, it's the Surly way. What they lack in flash and flair, they make up in awesomeness. They're made from Merino wool for the perfect pairing of breathability and durability. They keep your feet comfortable in any temperature, even when wet, and they cover your shins. What more do you need?
Surly Socks
$19.00
That's right, Socks. No fancy name here, no splashy logos, it's the Surly way. What they lack in flash and flair, they make up in awesomeness. They're made from Merino wool for the perfect pairing of breathability and durability. Plus, they keep your feet comfortable in any temperature, even when wet. What more do you need?
Surly Cassette Cog
$35.00
Pair this cog with your Shimano-compatible rear hub, spacers and a lockring (sold separately) and discover the joy and simplicity of a singlespeed without the cost of a new wheel. Machined from heat-treated chromoly and then chrome plated, these seriously tough cogs are strong, shiny and they come in sizes from 13T to 22T so you can pick the perfect gear.
Surly 5-inch Wool Socks
$15.00 - $19.00
As you must know by now, wool resists odor. That is a good feature in a sock. They also wick and insulate better than cotton or all synthetic, so you can wear them comfortably in a pretty wide range of climates. Surly socks are made by DeFeet. They are Merino wool, with a small percentage of synthetic for increased durability. Each design comes in four sizes so pretty much everyone should find one that fits.
Surly Logo T-Shirt
$30.00
Shirts are a color, sometimes it's black, or green, or red, or gray or one they haven't picked yet. Printed Surly logo on the front is a different color, usually black or white.
Surly Long Haul Trucker Fork (26-inch)
$130.00
The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. The fork’s new crown provides ample clearance for 26 x 2.1 tires and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube. - Axle-to-crown: 26" = 376mm - Offset: 45mm - Steerer: 26" (42–54cm frames) = 300mm; 26" (56–62cm frames) = 400mm - Tire Clearance: 26 x 2.1" - Weight: 26" = 2.1 lb (0.97kg) uncut
Surly Trailer Hitch/Yolk Assembly (trailer sold separately)
$325.00
Surly's Trailer Hitch/Yolk Assembly is the correct hitch for Surly's Bill and Ted Trailers (sold separately). This fine chromoly hitch securely and quickly attaches to your bike using the included proprietary quick-release skewer. Or, if you have a bolt-on rear wheel, you just bolt the hitch onto your rear axle. The hitch fits most bicycles whether they feature full suspension, disc brakes, rear racks and fenders, or you name it. And it works with bicycles with wheels as small as 20 inches and as large as 29 inches, while always keeping the trailer bed level with the ground. The hitch also adjusts to accommodate rear hub widths from 120 to 145mm and allows you to align the centerline of the trailer on the centerline of the bike for easy pulling. Maybe best, the hitch lets you remove the trailer quickly and easily when you don't need it. Plus, by putting hitches on all your favorite bikes you can easily move the trailer between bikes!
Surly Lightweight Neck Toob
$35.00
Hi, I'm the Surly Lightweight Neck Toob. You might remember me from such films as “It's Cold! Don't Forget Your Neck Toob!" and “Look At This Thing, It Came From a Sheep!" Right now you might be thinking, “But Surly, I already have a Neck Gaiter from you guys. Do I really need a Neck Toob?" And the answer is maybe. Unlike the existing Neck Gaiter, which is made of a light inner layer and a midweight outer layer, I'm made of two lightweight layers. For those days when it's too chilly to leave your face and neck exposed but not cold enough for the full-blown Gaiter, I try to provide a nice, moisture-wicking alternative. I'm sized to fit most necks, and I can be worn a bunch of different ways. Thanks for tuning in, we'll see you next time. Your Friend, The Surly Neck Toob
Surly Tubeless Kit
$37.00
A properly set up tubeless fatbike tire is like the holy grail of suppleness and, until now, we've forced you all to piecemeal together a tubeless kit for your Other Brother Darryl rims (Sorry about that. It won’t happen again, we promise… probably). But now you don’t have to do that anymore because our Tubeless Kit has everything you need to ditch your fat tubes. It comes with two of our nylon rim strips, a roll of Whisky Parts Co. tubeless tape, two tubeless valves, and two Problem Solvers Super P-Nuts. Just add your favorite sealant and let ‘er rip.
Surly Big Dummy Bag Brake Caliper Wear Patch
$11.00
Extend the life of your Dummy bags with this replaceable wear patch.
Surly Bearing Pre-Load Cap Non-Drive Crank Bolt
$6.50
Surly bearing adjust caps for Mr. Whirly and OD
Surly Big Dummy Frame Insert
$13.00
Surly Surly Big Dummy Frame Protective Plug Insert. - Notice the tapered end of each plug, if the end of a tube is dented, tap the protective plug into the tube with a soft hammer to round the tube out - Designed to prevent damage to the front bridge tube while frame is being shipped - Doubles as a tool to help round out any damaged bridge tubes or upright tubes during use of the bike - The diameter of the plug is designed to round it out to the correct diameter so that it receives accessories properly