Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Hubs

$135.00
Campagnolo's Record hub is loved all over the world for its pro-level quality, super-smooth bearings and excellent durability. It features an oversize shell for premium stiffness and it's built with cold-forged aluminum to maximize strength and minimize weight. Plus, you can easily adjust the bearing preload with a simple turn of an Allen wrench — even while the wheel is still on your bike.

$70.00
Surly's Ultra New Rear Hub is ready for singlespeed mayhem. This gorgeous hunk of aluminum has the capability you need with reliable sealed bearings. It's available with threads for fixed cogs or freewheels, so you can set up the drivetrain of your dreams. Plus, this hub's 135mm width fits most MTB frames and the hollow chromoly axle provides a flex-free ride as well as simple quick-release skewer compatibility.

$235.00
The DT Swiss 240s MTB Center Lock Front Hub hits the sweet spot between low weight and reliability. With multiple axle options and 6-bolt rotor adapters for the Center Lock spline, you can build up a high-end wheel for nearly any bike. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.

$305.00
DT Swiss' 350s Straightpull Center Lock hub hits the sweet spot between low weight and reliability. The straight pull spoke design makes for a stiff, responsive mountain bike wheel that will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals. And the Center Lock attachment makes installing and removing disc rotors simple and fast.

$541.00
The DT Swiss 240s Center Lock hub hits the sweet spot between light weight and reliability. Whether you're racing or just getting around town on a singlespped, the 240s will roll for thousands of nearly frictionless miles. The short freebody lets you dial in your perfect chainline for quiet, smooth pedaling. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals.

$15.00 - $20.00
Stan's 3.30/3.30Ti Hub Kit converts Stan's 3.30 front hubs from quick-release to through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. Conversion kits available in 12mm and 15mm.

$80.00
This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.

$435.00
The DT Swiss 240s MTB Center Lock Rear Hub hits the sweet spot between low weight and reliability. With multiple axle options and 6-bolt rotor adapters for the Center Lock spline, you can build up a high-end wheel for nearly any bike. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals.

$85.00
Surly's Ultra New Disc Front Hub is a gorgeous hunk of aluminum that boasts reliable sealed bearings and a 6-bolt disc attachment. The forged chromoly axle is flex-free for steering precision, long-lasting durability and simple quick-release compatibility.

$100.00
Surly's Ultra New Disc Rear Hub is just the thing for singlespeed fanatics and one-gear mountain riders. This gorgeous hunk of aluminum boasts reliable sealed bearings and a 6-bolt disc attachment on one side and threads for a singlespeed freewheel (or fixed cog) on the other. A hollow axle lets you choose how to secure it to your dropouts. You have choice between the included fixing bolts or a quick release skewer (sold separately). And, that aforementioned chromoly axle is flex-free to take all the abuse you can dish out, and then some!

$60.00
Track stars and fixed-gear converts will love Surly's Ultra New Front Hub. This gorgeous hunk of aluminum sports sealed bearings for all-weather reliability and low friction. And, the hollow axle is forged from flex-free chromoly for steering precision, long-lasting durability and simple quick-release compatibility.

$70.00
Build your singlespeed or fixie bike around Surly's Ultra New Roadie Rear Hub. This gorgeous hunk of aluminum has the capability you need and reliable sealed bearings, too! It sports threads for a track cog and lockring on one side and a freewheel on the other so you can decide how you want to roll. Plus, this hub's 130mm width fits most road frames and the hollow chromoly axle provides a flex-free ride as well as simple quick release skewer compatibility.

$70.00
Track stars and fixed-gear converts love Surly's Ultra New Track Rear Hub! This gorgeous hunk of aluminum boasts reliable sealed bearings, and your choice of fixed/fixed or fixed/free gearing. Plus, this hub's 120mm width fits most track frames and the flex-free solid axle is forged from rugged chromoly.

$339.00
The DT Swiss 240s Straightpull road hub hits the sweet spot between low weight and reliability. The straight pull spoke design makes for a stiff, responsive 11-speed Shimano-compatible wheel that will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals. Lace it up and hit the road.

$230.00
The R45 front hub is built to address our road and cross riders’ demands for Chris King performance in a lighter weight and more aerodynamic package. Defined by a narrow hub body and low flanges the R45 front hub is a sleek base for the fastest wheels.
Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use.
- Engineered, manufactured and assembled in Portland, Oregon USA
- 5-year built-to-last warranty
- Legendary made-in-house bearings
- Easily serviceable and completely re-buildable with our R45 Hub Service Tool

$169.00
The DT Swiss 240s Straightpull road hub hits the sweet spot between light weight and reliability. The straight pull spoke design makes for a stiff, responsive wheel that will roll for thousands of nearly frictionless miles.

$179.99
The Antigram is a 36-H rear hub that is strong, light and reasonably priced with in-bound axle bolts that is both RHD/LHD switchable and guard compatible.
SPECS
- 2014-T6 forged aluminum hub shell
- 6903RS sealed cartridge ball bearings
- 9-T driver with 3-Pawn independent springs design and precision caged needle bearings
- RHD/LHD switchable
WEIGHTS
- With 14mm Chromoly Axle: 14.5oz / 411g
- MEASUREMENTS Drive Side
- Effective Flange Diameter: 49mm
- Non-Drive Side Effective Flange Diameter: 49mm
- Drive Side Flange to Center Distance: 30mm
- Non-Drive Side Flange to Center Distance: 30mm

$105.00
The value-packed DT Swiss 350s Straightpull road hub hits the sweet spot between light weight and reliability. The straight pull spoke design makes for a stiff, responsive wheel that will roll for thousands of nearly frictionless miles.

$241.00
The Chris King ISO Small Diameter (SD) front hub is designed for mountain bikers seeking a lightweight hub that doesn’t compromise performance. Milled from solid bar stock, the high flange diameter grants the use of shorter spokes and a wider bracing angle to increase wheel strength. Proven by professionals and chosen by privateers, our ISO SD hub puts you in the race with legendary Chris King performance.
Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use.
- Engineered, manufactured and assembled in Portland, Oregon USA
- 5-year built-to-last warranty
- Legendary made-in-house bearings
- Easily serviceable and completely re-buildable with our Chris King Hub Service Tool
- Responsibly lightweight
- Easily convertible between standard QR and 15x100mm axles

$460.00 - $504.00
Chris King ISO B 148x12 rear hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, ISO B hubs have heavy-duty bearing seals, and a threaded driveshell seal ring.
Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use.??
The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound.
- Engineered, manufactured and assembled in Portland, Oregon USA
- Updated hub shell shape with canted flanges for stronger wheel builds
- 5-year built-to-last warranty
- Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement
- Legendary made-in-house bearings
- Easily serviceable and completely re-buildable with our Chris King Hub Service Tool
- Responsibly lightweight
- Specifically designed for "BOOST" 148mm x 12mm axle standard

$69.99
• Grade 3 balls and magnetite rust proof finish
• Abec 5 precision and silicone w seals
• 3 times cryogenic race treatment
• Bearings sold individually, not as pair

$369.00 - $415.00
DT Swiss' strong, reliable 540 Tandem Rear Hub is built for the long haul. Whether you're out there for a week, a month, or on a daily commute, the high-end bearings, renowned DT Star Rachet internals, and additional spoke holes deliver thousands of nearly frictionless miles on your tandem or fully-loaded touring rig.

$189.00
The DT Swiss 240s Straightpull Center Lock hub hits the sweet spot between light weight and reliability. The straight pull spoke design makes for a stiff, responsive mountain bike wheel that will roll for thousands of nearly frictionless miles. And the Center Lock rotor attachment makes installing and removing rotors fast and simple.

$250.00
The DT Swiss 240s Straightpull 6-Bolt hub hits the sweet spot between light weight and reliability. The straightpull spoke design makes for a stiff, responsive mountain bike wheel that will roll for thousands of nearly frictionless miles.

$60.00
Light weight 20mm thru axle MTB front hub. Forged from light weight alloy with Hi Lo flanges maximizing the strength-to-weight ratio.
- 20mm thru axle alloy front hub
- Hi Lo flange with CNC disc brake mounts
- 2 sealed cartridge bearings

$34.00
Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.

$170.99
From World Cup DH runs to big hits on your local trails, Shimano's Saint rear hub is the answer. Its overbuilt features, like a 12mm thru-axle, beefy flanges, and impact-resistant angular contact bearings, give you the confidence you need to go big and stick the landing. The freehub uses micro-ratchet construction for fast engagement so you can sprint out of the corners and pick up speed for that next double. It's compatible with 8-,9-, and 10-speed drivetrains and uses Shimano's Centerlock Rotor Mount to keep rotor swaps easy.
Page 1 of 4
Next page